Skip to Content
GBP
  1. All Products
  2. West3D AMBROSIA ASA Galactic Sparkle 1KG

West3D AMBROSIA ASA Galactic Sparkle 1KG

https://www.desktopmachineshop.com/web/image/product.template/158/image_1920?unique=0a0b308
(0 review)

West3D AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

Ambrosia Filament's line of ASA Galactic (Sparkle) filament is derived from 100% Virgin Grade-A Non-Toxic pellets.  This filament has glitter infused into the filament that results in a beautiful sparkle effect. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.

£ 18.99 18.99 GBP £ 18.99

£ 18.99

Not Available For Sale

  • Filament Colour

This combination does not exist.

Contact Us

Terms and Conditions 

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required. ASA Galactic filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG). 

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Derived from 100% Virgin (Grade-A) non-toxic pellets
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight: 

 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Ambrosia Filament's Recommended Print Settings for our ASA filament:

AttributeAccepted Value(s) [Our Recommended Value]
Extruder Temperature230-260 Degrees Celsius [250]
Heated Bed100-115 Degrees Celsius [110]
Build SurfacePEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan0-70% range varies by cooling capabilities
Environmental Temperatures40-120C [45C]
Soluble Support MaterialsHIPS


Technical Specifications for our ASA Filament:

 Physical PropertiesTest MethodologyValues
DensityISO11831.08-1.09 g/cm^3
Melt Flow Rate (250C/2.16KG)ISO 113320-25 g/10min
Mechanical PropertiesTest MethodologyValues
Tensile StrengthISO 52742-45 Mpa
Elongation at breakISO 5279-12%
Flexural ModulusISO 5271200-1400 Mpa
Flexural StrengthISO 17875-79 Mpa
Impact StrengthISO 18019-20 KJ/m^2
Thermal Dynamic PropertiesTest MethodologyValues
HDT@ 0.455 MPa(66 psi)ISO 7588C


 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.