?unique=24a3d56)
?unique=24a3d56)
LDO Voron V2.4 Rev C
The Voron V2 is a modified CoreXY design with a static bed and a gantry that moves along the Z axis. It is a much more complex build because it includes things such as 4-point gantry tramming to align to the print surface, more stepper motors and other unique features. It is also designed to be fully enclosed so it prints ABS or similar filaments very well. Due to the linear rails the design is scalable in stock form 250x250x220mm and 300x300x280mm all the way up to 350x350x330mm. More linear rails, larger print surface, and other V2-specific items make this printer more expensive.
Kit contents:
Everything in the Voron BOM plus:
- V2.4r2 Compatibility - Our kit is designed to be compatible with V2.4 Rev2.
- Stainless Steel Linear Rails - 12H size rails for X axis included. No more worrying about rusty rails. Remember to properly lubricate your linear rails!
- Toolhead PCB - Our kit includes a modified Hartk toolhead PCB. In addition, we designed a toolhead breakout PCB to make wiring at the controller end simple and straightforward.
- Brass Heatset Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.
- Input Shaper Tool- We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
- Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See our detailed wiring guide here.
- LED Lighting - Bring lighting to your Voron with included LED strips and all necessary wiring!
- Nevermore Filter - Instead of the stock exhaust we include parts for an the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions).
- Klicky Mod - Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1.
- Small Tools - We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.
- 2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
What you need to source:
- Printed parts
Useful Links:
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.